Model AM Straight Side Press
|
 |
The model AM straight side press is a more traditional style of straight
side with much more left to right bed and ram area. The AM is able to hold tolerance
left to right much better than a direct hydraulic design due to its bellcrank linkage
that gives the press full tonnage from one end of the press to the other. This
single cylinder design develops full tonnage anywhere along the bed left to right and
front to back. The bellcrank linkage system is actuated with a single cylinder
utilizing A660 bronze at the bearing points. |
 |
| Model AM200-10 |
200 ton press in automated feed line & optional paint |
|
|
| These bearings are Designed to withstand up to 6 times the machines
overall tonnage and they are covered by our extensive 5 year parts warranty. The
model AM is truly designed to accept virtually all forms of press applications whether
it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing
and so on. The AM is available up to 600 tons and particularly excels at progressive
die set ups where you have varying amounts of tonnage being applied across the bed all
in the same stroke. |
|
 |
|
| Massive unitized welded frame |
| Extremely simple low pressure hydraulic system with cooler |
| Ram mounted controls and/or pedestal controls are available |
| Enclosed end frames w/windows for pass thru of material, dies, feeding equipment,
etc |
| 400 ton straight side press with optional light curtains, extra t-slots
in the bed and ram, automatic lubrication system and air counterbalance system with
air tank and optional white paint |
|
|
|
| **For Punching Or Blanking applications De-Rate The Overall Press Tonnage By 1/3 |
|
|
|
Loading Applications For the Model AM Straight Side Press
|
 |
| Single cylinder bellcrank linkage system generates full tonnage all across the bed
and ram |
|
 |
Center/Off-Center/Left to Right and or Front to Back Loading |
Model AM500-10
500 ton capacity x 10’ |
|
|
|
|
Model AM Press Specifications (6 Point Gibbing)
|
Tonnage
Forming/Punchin |
Bed Size |
Stroke |
Open
Height |
Weight |
|
100 ton
100/66
|
24" x 96" |
6" |
14" |
30,000 lbs. |
| 24" x 120" |
6" |
14" |
35,000 lbs |
| 30" x 144" |
6" |
14" |
50,000 lbs |
200 ton
200/130 |
24" x 96" |
6" |
16" |
45,000 lbs |
| 24" x 120" |
6" |
16" |
50,000 lbs |
| 30" x 144" |
6" |
16" |
75,000 lbs |
300 ton
300/200 |
24" x 120" |
8" |
18" |
70,000 lbs |
| 30" x 144" |
8" |
18" |
85,000 lbs |
400 ton
400/265 |
24" x 120" |
8" |
20" |
78,000 lbs |
| 30" x 120" |
8" |
20" |
84,000 lbs |
500 ton
500/330 |
24" x 120" |
8" |
20" |
95,000 lbs |
| 30" x 120" |
8" |
20" |
95,000 lbs |
| Standard hydraulic Systems for Model AM and CM
Presses |
| Tonnage |
H.P. |
Approach |
Press |
Return |
| 100 |
20 |
85 |
29 |
155 |
| 200 |
30 |
105 |
26 |
200 |
| 300 |
30 |
61 |
17 |
120 |
| 400 |
40 |
74 |
14 |
115 |
| 500 |
50 |
66 |
17 |
19 |
|
Ermaksan Press BrakesThe player is loaded in the off position.
Press the forward arrow to begin the videos.
Subsequent videos load and play automatically.
