SLIP ROLL 48 POWERED
Catalog Number: TESR48P

Prices starting at:
Call for quote

Tennsmith’s SR48P powered slip roll combines all the features of our SR48 initial pinch roll with the productive advantage of electric- powered drive for production forming of curved parts and tubes made of 16-gauge and lighter sheet metal

Tennsmith Model SR48P
Tennsmith’s SR48P powered slip roll combines all the features of our SR48 initial pinch roll with the productive advantage of electric- powered drive for production forming of curved parts and tubes made of 16-gauge and lighter sheet metal. Drive power is supplied by a heavy-duty, industrial quality gear reduction motor and roller chain directly to the gear train.
The roll drive is controlled by a toggle-action, shrouded foot pedal for instant forward and reverse action. The drive motor is equipped with an electromagnetic brake to prevent roll creep and over-forming. Electrical and operator safety features include a full-length front and back wire cable safety mechanism which instantly stops the rolls when tripped, two magnetic motor starters, fully enclosed electrical box with pilot light, insulated reinforced conduit for all wiring and fully enclosed drive train.
The rolls are turned, ground and polished, high carbon steel, providing rigidity and resistance to wear and abrasion. The rolls and gears are mounted in hardened bronze bushings for long life and precision operation. All three rolls are gear driven to ensure even starting and feeding of capacity materials. Convenient operating features include large roll adjusting screws, scales for speeding repeat set-up, a wide clearance top roll latch and an end-mounted handle to lift the upper roll for easy material removal. Wire grooves and three full-length starting grooves in the rear roll are standard.
Tennsmith Mfg.’s Model SR48P is the best value of any four-foot, 16-gauge powered roll on the market.

Slip Roll		SR48P
Capacity, mild steel		16 gauge / 1.6 mm
Maximum forming length		49 in. / 1244 mm
Diameter of rolls		3 in. / 76 mm
Minimum forming radius		1-1/2 in. / 38 mm
Wire grooves		3/8, 1/2, 5/8 in. / 9.5, 12.7, 15.8 mm
Gearing ratio		4 : 1
Roll speed		22 RPM / 17.28 sfpm
Motor-230/460v, 3-phase, 60Hz		3/4 hp
Dimensions	Length	77 in. / 1956 mm
	Width	29 in. / 737 mm
	Height	50 in. / 1270 mm
Shipping weight		1100 lbs. / 499 kg
Export crate		125.5 cu. ft. / 3.56 cu. m

SLIP ROLL 48 POWERED was updated on Thursday 06 December, 2007.

Product 3 of 4

Thank you for viewing this SLIP ROLL 48 POWERED information. If you need any more information regarding SLIP ROLL 48 POWEREDs feel free to contract us.

SLIP ROLL 48 POWERED

SLIP ROLL 48 POWEREDCatalog Number: TESR48P

SLIP ROLL 48 POWERED
Catalog Number: TESR48P