ROTO-DIE MODEL 5
Catalog Number: RD-5

Prices starting at:
Call for quote

The Roto-Die system - over 40 years of sheet metal-forming experience. Roto-Die Hydraulic Benders are shipped complete and ready to tackle your toughest forming jobs.

Roto-Die is four precision forming tools in one. Merely by shifting the selection lever, one operator can perform all basic sheet-metal forming operations. No die to change. The Roto-Die hydraulic bender forms full- length ducts, gravel stops, standing lock seams, flashing and hemming operations accurately and economically. The compactness inherent in the cylindrical die design permits acute reverse bends not possible with conventional wide-bed machines. The Roto-Die indexes quickly and accurately to all forming stations. Automatic detention assures positive die alignment. Centerline machined upper dies are instantly inter- changeable in all Roto-Die openings without special stops or adjustments. A Roto-Die hydraulic bender is as simple to operate as a hand break - but has infinitely more production capacity.

Most sheet-metal configurations can be formed with one hand by one operator. The ram may be jogged, stopped or returned to "up" position at any point of the stroke. It may also be inched for accurate positioning of the work, reducing material loss and gauge-adjustment time. Disappearing pins are conveniently located for fast, one-man positioning in cross-breaking (paneling) and rectangular duct forming. Pin gauges are easily removed and relocated.

Just 4 of the possible channels producible on a Roto-Die

Simple adjustments permit operating speeds up to 50 strokes per minute for maximum production output. Multiple handling of sheet stock is kept to a minimum. This allows you to fabricate most commercial ventilating jobs, including the new TDC duct system, in the Roto-Die in one-fourth the time ordinary benders require. Labor cost is reduced. Shop productivity is increased.

Install a Roto-Die hydraulic bender in your shop. It should pay for itself in a few months. And you'll be receiving the extra profits for years.

Five models to meet your requirements.
Immediate delivery from stock.
Proven design - thousands of machines in operation.
All basic metal-forming operations can be made without die change or major adjustments.
Infinitely variable speed control for easy selection of ram speed.
Rugged construction for long, trouble-free operation in heavy duty service.
Best overall value.

GENERAL SPECIFICATIONS	5	10	11	15	NEW! 15/12
Bending capacity 7/8" die opening .......	60"X16 ga.	120"X16 ga.	120"X16 ga.	120"X14 ga.	144"X16 ga.
with angle insert	.	72"X10 ga.	72"X10 ga.	120"X10 ga.	144"X14 ga.
Length of stroke .......................	3"	3"	3"	3"	3"
Strokes per min. (approx.) ........	20 to 50	20 to 50	20 to 50	20 to 50	20 to 50
Die clearance ............................	2-1/8"	2-1/8"	2-1/8"	2-1/8"	2-1/8"
Die space ............................	7-1/2"	7-1/2"	7-1/2"	7-1/2"	7-1/2"
Motor .................................	5 HP	7-1/2 HP	7-1/2 HP	15 HP	15 HP
Overall dimensions --	.	.	.	.	.
Length ...................................	7' 10-1/2"	12' 1"	13' 0"	12' 6-1/4"	14' 6"
Front to back .........................	22"	22"	22"	22"	22"
Height ......................................	5' 3-1/2"	5' 3-1/2"	5' 3-1/2"	6' 1"	6' 1"
Bed and ram plates --	.
Thickness .............................	2-1/4"	2-1/4"	2-1/4"	2-1/2"	2-1/2"
Depth -- ram .......................	18-5/8"	25"	25"	34"	34"
Depth -- bed ........................	25"	25"	25"	34"	34"
Depth -- length ......................	72"	123"	130"	123"	147"
Front and rear support arm range ...	39"	39"	39"	39"	39"
Approx. shipping weight . . . . . . . . . . . .	3,300 lbs.	5,700 lbs.	6,500 lbs.	8,950 lbs.	10,000 lbs.

STANDARD ACCESSORIES

HYDRAULIC BENDER

1-No. 37 Roto-Die with:

7^o Cross Breaking Groove
89^o Die Opening 3/8" Wide
89^o Die Opening 7/8" Wide
89^o Die Opening 1/2" Wide

1-No. 1 Forming Die (85^o) 121" long
1-No. 24 Hemming Die (30^o) 121" long
1-No. 50 Sheet Support Arms with Clips
1-No. 51 Squaring Arm with Clips
1-No. 52 Gaging Blocks
1-No. 53 Disappearing Spring-Pin Gages
1-No. 60 Depth-of-Stroke Adjustment with Indicators
1-No. 65 Length-of-Stroke Adjustment
1-Hydraulic Pressure Gauge, Shut-off Valves, Hydraulic Oil, Wrench & Instruction Manual

All models are equipped with depth-of-stroke adjustment with indicators, length-of-stroke adjustment, and motor and controls for 230/460 Volts, 3 Phase 60 Hertz.
(Other 3 Phase voltages also available.)
Hydraulic oil and a wrench are also furnished.

An extensive, knowledgeable dealer network backed up by factory support is available nationwide to give local service and instruct your personnel. Technical assistance is also available to assist you in obtaining the best production from your machine.

ROTO-DIE MODEL 5 was updated on Thursday 15 May, 2008.

Product 10 of 10

Thank you for viewing this ROTO-DIE MODEL 5 information. If you need any more information regarding ROTO-DIE MODEL 5s feel free to contract us.

ROTO-DIE MODEL 5

ROTO-DIE MODEL 5Catalog Number: RD-5

ROTO-DIE MODEL 5
Catalog Number: RD-5