|
The Piranha PII-65 Ironworker has an Automatic Urethane Hold Down on the Plate and Angle Shear, dual-operator controls for the punch station and shear/coper stations, in addition to a 24" plate shear capacity, the largest in it's tonnage class. Both ends of the Piranha PII-65 Ironworker can be operated independently of each other at the same time.
|
|
Piranha PII-65 Ironworker Standard Features:
- Complete Punching Attachment with stripper
- 10 Punch and Die sets
- Electric Punch End Control
- Remote Foot Switch & Limet Switch
- Stroke Control
- Manual Shear and Coper Control
- Set of Round Bar Knives [2 way] (customers choice to 1-1/2")
- Set of 20.625" Plate Shear Knives [4 way]
- Set of 24" Plate Shear Knives
- Set of Coper Knives [2 way top] [4 way bottom]
- Set of Angle Shear Knives [8 way top] [4 way bottom]
- Chip Buckets (coper end)
- Extra Oil Filter
- Coupling Wrench
- Intergral Lifting Lug for instant portability
|
Piranha PII-65 Ironworker CAPACITIES & SPECIFICATIONS
|
|
Throat Depth
|
9"
|
Open Height
|
14"
|
|
Closed Height w/o Die Block
|
7-3/4"
|
Work Stations From Floor
|
41"
|
Hydraulics:
Pump GPM
System R/V PSI
|
7.5
3500
|
Stroke Length
|
7"
|
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
|
Optional
1/4" to 1-1/2"
1/2" to 1"
|
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
|
10 HP 3 Phase
|
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)
|
65 Tons
1-1/16" thru 3/4"
*5" thru 1/8"
11" x 38"
|
Coper-Notcher (Tons)
(Mat.)
|
56
2-3/4" x 4" x 1/4"
|
Dimensions
(NET) W-L-H
|
38"x90"x72"
|
Plate Shear
|
24" Long
3/4" x 8"
5/8" x 12"
1/4" x 24"
|
|
Bending Attachment
|
65 Tons
|
Weight (NET) lbs
|
4000
|
Strokes Per Minute
Optional Speed-Up Kit
|
9 @ 1"
25 @ 1"
|
Angle Shear (Max.)
w/Special Blade
|
35" x 5" x 3/8"
4" x 4" x 1/2"
|
The Amazing Piranha IronworkerThe player is loaded in the off position. Press the forward arrow to begin the videos. Subsequent videos load and play automactically. |
