The Piranha PII-35 Ironworker (a.k.a. US-1)is a complete 5-station fabrication center with dual-slide controls for the punch station and shear/coper stations. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling.
Piranha PII-35 Ironworker Standard Features:
- Complete Punching Attachment with stripper
- 10 Punch and Die sets
- Stroke Control
- Manual Shear and Coper Control
- Chip Buckets (2 each)
- Extra Oil Filter
- Coupling Wrench & 3/8" Allen Wrench
- Intergral Lifting Lug for instant portability
|
|
- Set of Round Bar Knives [2 way] (customers choice to 1-3/8")
- Set of 10" Plate Shear Knives [4 way]
- Set of 13" Plate Shear Knives [4 way] (instead of Round Bar Knives and 10" Plate Shear Knives)
- Set of Angle Shear Knives [8 way top] [4 way bottom]
- Electric Punch End Control including Remote Foot Switch & Limit Switch
|
Piranha PII-35 Ironworker CAPACITIES & SPECIFICATIONS
|
|
Throat Depth
|
7"
|
Open Height
|
10"
|
|
Closed Height w/o Die Block
|
7-1/4"
|
Work Stations From Floor
|
40"
|
Hydraulics:
Pump GPM
System R/V PSI
|
4.4
3500
|
Stroke Length
|
4-1/4"
|
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
|
Optional
1/4" to 1-3/8"
1/2" to 1"
|
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
|
5 HP 3 Phase
|
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)
|
35 Tons
13/16" thru 1/2"
*3-1/2" thru 1/8"
11" x 21-1/4"
|
Coper-Notcher (Tons)
(Mat.)
|
40
2-14" x 3" x 1/4"
|
Dimensions
(NET) W-L-H
|
23"x62"x63"
|
Plate Shear
|
13" Long
5/8" x 6"
1/2" x 8"
1/4" x 13"
|
|
Bending Attachment
|
35 Tons
|
Weight (NET) lbs
|
2600
|
|
Strokes Per Minute
|
28 @ 1"
|
Angle Shear (Max.)
|
3-1/2" x 3-1/2" x 5/16"
|
|
The Amazing Piranha IronworkerThe player is loaded in the off position. Press the forward arrow to begin the videos. Subsequent videos load and play automactically. |
