The Piranha PII-140 Ironworker has dual-operator electric controls (foot pedal and joystick) for the punch stations and shear/coper stations. Also featured are Automatic Urethane Hold Downs on the Angle, Plate and Bar Shears. The large, open punch stations allow the use of a virtually unlimited range of standard accessories and special tooling.
|
|
Piranha PII-140 Ironworker Standard Features:
- Complete Punching Attachment with stripper
- 10 Punch and Die sets (9/16" thru 1-9/16")
- Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear
- Front and rear 2 position joy stick controls (electric)
- Front and rear Remote Electric Foot Switches
- Front limit switch stroke control
- Set of Round Bar Knives [2 way] (customers choice to 2")
- Set of 14.5" Plate Shear Knives [4 way]: For PII-110
- Set of 16.625" Plate Shear Knives [4 way]: For PII-140
- Set of 20.5" Plate Shear Knives [4 way] instead of Round Bar Knives and 16.625" Plate Shear
- Knives: For PII-140
- Extra Blank Knife to extend shear to 18" on PII-110 or 20.5" on PII-140
- Set of Coper Knives [2 way top] [4 way bottom]
- Set of Angle Shear Knives [2 way top] [4 way bottom]
- Chip Buckets (coper end)
- Extra Oil Filter
- Coupling Wrench
- Intergral Lifting Lug for instant portability
|
Piranha PII-140 Ironworker Specifications
|
|
Throat Depth
|
20.5"
|
Open Height
|
14"
|
|
Closed Height w/o Die Block
|
7-3/4"
|
Work Stations From Floor
|
44"
|
Hydraulics:
Pump GPM
System R/V PSI
|
15
3700
|
Stroke Length
|
7"
|
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
|
1/2" to 2"
1/2" to 1-3/8"
|
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
|
20 HP 3 Phase
|
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)
|
140 Tons
*1-3/4" thru 1"
5-5/16"
16" x 36"
|
Coper-Notcher (Tons)
(Mat.)
|
95
4" x 6" x 3/8"
|
Dimensions
(NET) W-L-H
|
38"x120"x85"
|
Plate Shear
|
20-1/2" Long
1" x 14"
3/4" x 18"
1/2" x 20"
|
|
Bending Attachment
|
18", 24", 36", 48"
|
Weight (NET) lbs
|
11,930
|
|
Strokes Per Minute (Approx.)
|
24 @ 1"
|
Angle Shear (Max.)
|
6" x 6" x 5/8"
|
The Amazing Piranha IronworkerThe player is loaded in the off position. Press the forward arrow to begin the videos. Subsequent videos load and play automactically. |
