The Piranha Ironworker P90 is the workhorse of the industry.
Its six (6) workstations are designed for ease of operation featuring Automatic
Material Hold Downs and Punch Strippers. If your fabrication requirements include
punching high tonnage holes and shearing ¾" or thicker plate, the Piranha Ironworker P90 is the
ideal machine for you.
Piranha Ironworker P90 Standard Features:
Complete Punching Attachment with split dove tail mounting
10" Punch and Die sets
12" bending Attachment with split dove tail mounting
Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate
and Bar Shear
Front and rear 5 position joy stick controls (electric) with jog up &
down, fast up & down, neutral
Remote Electric Foot Switch that can be connected at either end of the
machine
Electric Limit Switches that can be set for stroke control when using
foot control
Set of Round Bar Knives [2 way] (customers choice to 2)
Set of 16.625 Plate Shear Knives [4 way]
Set of 20.5" Plate Shear Knives [4 way] (instead of Round Bar Knives
and 16.625" Plate Shear Knives)
Extra Blank Knife to extend shear to 20.5"
Set of Angle Knives [8 way top] [4 way bottom]
Set of Coper Knives [2 way top] [4 way bottom]
Chip Buckets (2 each)
Extra Oil Filter
Coupling Wrench & 3/8" Allen Wrench
Integral Lifting Lug for instant portability
Piranha Ironworker P90 CAPACITIES & SPECIFICATIONS
Throat Depth
12"
Open Height
15-1/2"
Closed Height w/o Die Block
10-1/4"
Work Stations From Floor
44"
Hydraulics:
Pump GPM
System R/V PSI
32
2750
Stroke Length
5-1/4"
Bar Shear:
Round(Min. to Max.)
Square (Min. to Max.)
Optional
1/2" to 2"
1/2" to 1-3/8"
Motor STD. 230/460 1800 rpm
Opt. Phase and Voltage
On Request
15 HP 3 Phase
Punch:
Max. Material
Max. Hole *Special Tool
Platen Table Size (D-W)
90 Tons
1-1/8" thru 1"
*5" thru 3/16"
14-1/2"X21"
Coper-Notcher (Tons)
(Mat.)
95
4" x 6" x 3/8"
Dimensions
(NET) W-L-H
35"x90"x66.5"
Plate Shear
20-1/2" Long
1" x 12"
3/4" x 18"
1/2" x 20"
Bending Attachment 12"
Optional Lengths Available
Weight (NET) lbs
5800
Strokes Per Minute
40 @ 3/4"
Angle Shear (Max.)
6" x 6" x 5/8"
">
