-
Higher Maximum capacity;
-
Maximum radius is bigger (380mm- 15" and not 300mm- 11,8");
-
Variable bending speed (automatic or manual) due to the inverter
system;
-
easy and fast access to all machine functions by a menu control;
-
Maximum capacity 76 x 6 mm (3" O.D. x 0.236") varies according
to type of material (see table);
-
Minimum diameter 5 mm (1/4").
-
Minimum bending radius 2 x ø (varies with the tube wall thickness
and material).
-
Bending radius from R10 to R380 mm (0.4"-15").
-
Maximum bending angle 180°.
-
Variable bending speed (automatic or manual) due to the INVERTER
system, with acceleration and deceleration ramps for optimum bending results.
-
MENU control of the microprocessor allows easy and fast access
to all machine functions, including bending programming, selection of operating language
and autodiagnosis of faults.
-
Bending angle and springback angle are programmable by means of
the microprocessor for 10 programs of 9 bending angles, with backup battery to store data.
-
Ready to use either with the ERCOLINA mandrel bending accessory
or with the 2-axis tube positioning accessory (Art.A40/P) to bend without mandrel.
-
Can be converted into Ring Rolling Machine with accessory Art.TBCE40MZ-
max capacity 11/2" pipe! For bending large radii.
-
"Soft touch" button control panel is ready to use with all mandrel
functions.
-
Rapid tool change time within 30 seconds, due to quick change
counterbending die system and hexagonal, centre drive socket on formers.
-
Easily movable by means of wheels incorporated into the rear of
the machine structure.
-
Rapid engagement and disengangement of the counterbending die.
-
Size 680 x 370 x 910 mm (27" x 15" x 36").
-
Weight 160 Kg (352 lbs) (Machine body only).
