LM510 5'X 10ga SHEAR
Catalog Number: TE90030

$LM510 5\'X 10ga SHEAR$

Tennsmith’s low-profile LM510 mechanical shears utilize a simple low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid performance.

With the overwhelming success of the LM Series shears, Tennsmith Mfg. is proud to introduce a new model, the LM510 shear. This unit is a natural progression in servicing the need for high quality, affordable shearing machines for the fabrication industry. The LM510 is equipped with a two-speed-powered back gauge with a 36-inch range as standard equipment. The shear is powered by a 12-1/2-hp gear motor attached to a mechanical linkage which provides smooth, quiet operation.

The LM510 now incorporates the unique 2x back gauge system. This allows the operator to move the backstop from 0 to 24 inches in approximately 2 seconds with only two rotations of the handle. An optional digital readout is available for this system.

The LM Series shears are standard with four-edge, high carbon, high chrome blades, independent, self-leveling holddown feet with neoprene inserts, single, continuous and job stroke cycles, motor reverse switch, precision-machined table with hand well, dual inch/metric inlaid bed scales and non-metallic gibs.

Independent, spring-loaded, self-leveling holddowns exert uniform pressure on a work piece, ensuring an accurate cut. The plungers have neoprene inserts to prevent marring the surface of the piece.
Models LM1014 and LM510 are standard with the new 2x back gauge system. This unique design allows the operator to move the backstop the complete travel from 0 to 24 inches with the two rotations of the handle. The system includes a brake for accurate, repeat cuts. The unit utilizes a 24-inch dual inch/metric scale. An optional digital readout is available.
The optional four-foot squaring arm is a precision gauge which can be mounted left or right and has inlaid inch/metric scaling and adjustable guide block. A toggle on the block lets sheet stock slide underneath, then pivots to the stop position.

The optional sheet support system is recommended for gauging of thin material. With this air-powered support mechanism, cumbersome, light-gauge stock can effectively be sheared by one operator. Available in rear discharge only.

Model LM510 has a rated capacity of 10-gauge mild steel with a maximum cutting length of 60-1/2 inches.

Tennsmith Mfg. LM Series shears are U.S.-made machines of quality manufacture at competitive prices.

LM Series Mechanical Shears		LM412	LM510
Maximum shearing capacity, mild steel		12 gauge 2.7 mm	10 gauge 3.43 mm
Maximum shearing capacity, stainless steel		16 gauge 1.60 mm	14 gauge 1.90 mm
Maximum cutting length		52-1/2 in. 1333.5 mm	60-1/2 in. 1535 mm
Back gauge range		24 in. 610 mm	24 in. 610 mm
Strokes per minute, full length		40	35
Number of holddown feet		8	12
Overall dimensions less gauges, L x W x H	length	72 in. 1829 mm	78 in. 1981 mm
	width	27 in. 686 mm	27 in. 686 mm
	height	55-1/2 in. 1410 mm	55-1/2 in. 1410 mm
Shipping weight		3200 lbs. 1455 kg	4000 lbs. 1815 kg
Floor space, gauges in position	length		78 in. 1981 mm
	width		60 in. 1524 mm
	height		55-1/2 in. 1410 mm
Motor-230/460v, 3-phase, 60Hz		5 hp	7-1/2 hp
Export crate		112 cu. ft. 3.18 cu. m	126 cu. ft. 3.58 cu. m

LM510 5'X 10ga SHEAR was updated on Friday 29 February, 2008.

Product 3 of 4

Other Products You Might Like

DIGITAL READ OUT (TELM510-DR)

Thank you for viewing this LM510 5'X 10ga SHEAR information. If you need any more information regarding LM510 5'X 10ga SHEARs feel free to contract us.

LM510 5'X 10ga SHEAR

LM510 5'X 10ga SHEARCatalog Number: TE90030

LM510 5'X 10ga SHEAR
Catalog Number: TE90030