LM1014 MECH SHEAR
Catalog Number: TE90032

Tennsmith’s low-profile LM1010 Series mechanical shear utilizes a simple low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid performance.

With the overwhelming success of the LM Series shears, Tennsmith Mfg. is proud to introduce a new model, the LM1010 shear. This unit is a natural progression in servicing the need for high quality, affordable shearing machines for the fabrication industry. The LM1010 is equipped with a two-speed-powered back gauge with a 36-inch range as standard equipment. The shear is powered by a 12-1/2-hp gear motor attached to a mechanical linkage which provides smooth, quiet operation.

The LM Series shears are standard with four-edge, high carbon, high chrome blades, independent, self-leveling holddown feet with neoprene inserts, single, continuous and job stroke cycles, motor reverse switch, precision-machined table with hand well, dual inch/metric inlaid bed scales and non-metallic gibs.

The LM1010 is rated at a maximum of 10-gauge material with a cutting width of 121 inches. To enhance productivity, optional equipment available for the machines include: four or ten-foot squaring arm, front support arms, light beam and protractor attachment. A rear drop sheet support system is available for all models.

Tennsmith Mfg. LM Series shears are U.S.-made machines of quality manufacture at competitive prices.

Independent, spring-loaded, self-leveling holddowns exert uniform pressure on a work piece, ensuring an accurate cut. The plungers have neoprene inserts to prevent marring the surface of the piece.
The optional four-foot squaring arm is a precision gauge which can be mounted left or right and has inlaid inch/metric scaling and adjustable guide block. A toggle on the block lets sheet stock slide underneath, then pivots to the stop position.
The optional sheet support system is recommended for gauging of thin material. With this air-powered support mechanism, cumbersome, light-gauge stock can effectively be sheared by one operator. Available in rear discharge only.

LM Series Mechanical Shears		LM1010	LM1014
Maximum shearing capacity, mild steel		10 gauge 3.43 mm	14 gauge 1.90 mm
Maximum shearing capacity, stainless steel		14 gauge 1.90 mm	16 gauge 1.60 mm
Maximum cutting length		121 in. 3073 mm	121 in. 3073 mm
Back gauge range		36 in. 914 mm	24 in. 610 mm
Strokes per minute, full length		31	35
Number of holddown feet		16	16
Overall dimensions less gauges, L x W x H	length	145 in. 3683 mm	139 in. 3531 mm
	width	39 in. 991 mm	27 in. 686 mm
	height	59-1/2 in. 1511 mm	55-1/2 in. 1410 mm
Shipping weight		9400 lbs. 4273 kg	6275 lbs. 2846 kg
Floor space, gauges in position	length	145 in. 3683 mm	139 in. 3531 mm
	width	78 in. 1981 mm	60 in. 1524 mm
	height	59-1/2 in. 1511 mm	55-1/2 in. 1410 mm
Motor-230/460v, 3-phase, 60Hz		12-1/2 hp	7-1/2 hp
Export crate		390 cu. ft. 11.08 cu. m	252 cu. ft. 7.13 cu. m

LM1014 MECH SHEAR was updated on Friday 29 February, 2008.

Product 2 of 4

Thank you for viewing this LM1014 MECH SHEAR information. If you need any more information regarding LM1014 MECH SHEARs feel free to contract us.

LM1014 MECH SHEAR

LM1014 MECH SHEARCatalog Number: TE90032

LM1014 MECH SHEAR
Catalog Number: TE90032