| OPTIONAL FEATURES |
| Optional Blade Gap Adjustment With Positive Stops Provide Wide Range Of Shearing Capacities. |
 |
| Optional Nylon Pads Shown On Hold Down Cylinder For Sensitive Workpieces. |
 |
| Optional Ball Transfers And Hand Slots Allow Easy Workpiece Handling. (Note:
Safety Barrier Removed) |
 |
|
SQUARING ARMS
4’, 8’ and 12’ squaring arms with embedded scales are available on the left or right
hand side of the shear (NOTE: The length of the squaring arm is measured from
the edge of bottom blade)
|
SWING STOP FOR SQUARING
ARM
Quick change stops that slide the length of the squaring arm for varying repetitive work.
|
POWER BLADE GAP ADJUSTMENT
Infinitely variable adjustment with electric control. Instantaneously moves blade
gap position at the touch of a button from in position to shear light gauge material to
the out position for heavier material to cover a wide variety of capacities.
|
2 POSITION POWER RAKE ADJUSTMENT
Provides the shear with 2 separate rake angles to allow the most precise cut in a wide
variety of capacities.
|
48” TRAVEL BACKGAUGE IN
LIEU OF STANDARD 36”
Same heavy duty, front operated, power backgauge with manual swingaway backstop with
48” of travel.
|
POWER SWINGAWAY BACKGAUGE
WITH 48” TRAVEL
Instantaneously swings the entire backgauge completely out of the way for shearing long
workpieces, comes equipped with 48” travel.
|
MANIFOLD CENTRALIZED LUBE
SYSTEM
Brings all lubrication points to a centralized location for easier maintenance.
|
AUTOMATIC LUBRICATION SYSTEM
Timed, air powered lubrication system that automatically brings grease to all lube points.
|
5/8” T-SLOTS MILLED IN TABLE
OF SHEAR
Slots in table for stops to be placed in table for repetitive work.
|
DROP STOPS FOR T-SLOTS
Disappearing/gravity stops to place in t-slots to allow workpiece to slide forward over
the drop stops, but not backwards.
|
36” T-SLOT SUPPORT ARMS
Heavy duty support arms with 5/8” t-slots to extend t-slots in table, also available
with embedded scales.
|
HAND SLOTS IN TABLE
Large slots milled in table to allow operators to get hands under workpiece for easy
handling.
|
T-SLOT ACROSS FRONT EDGE
OF SHEAR
5/8” t-slot across the front edge of shear to slide support arms the length of the table.
|
BALL TRANSFERS IN TABLE
Heavy duty 2” adjustable ball transfers to allow easy handling of workpieces recommended
for ½” and larger shears.
|
HI-CARBON HI-CHROME BLADES
HCHC blades have more carbon and chrome than the industry standard blades for use on
mild steel up to 3/8” and stainless up to 10 ga., not for use with hard metals. Your
machine comes standard with a pair of four edge shock resistant chrome blades which are
the industry standard.
|
HOLD DOWN
CYLINDERS MACHINED FOR IMPACT PADS
Holddown cylinders machined to accept nylon pads to protect sensitive workpieces.
|
