Ermak CNCAP Press Brake

General Specifications

• The precision repeatablility performance of these machines is achieved by synchronizing the hydraulic cylinders with the use of advanced proportional valve control,
• With automatic indexing of the axes at the start of running process, calibration is provided,
• Data imputs of material thickness, type and length through a user friendly software enables the control to calculate and provide the following:
  • Determination of bending power required for each stroke,
  • Graphical display of the unfolding of beding parts,
  • Positioning of the back gauge for each step of the beding program,
  • Determiniation of the most proctical bending sequence,
  • Automatic calculation of top beam stroke for bending angle,
  • Adaptation condition of tools and work pieces,
  • Graphical display of petential interferences between material, tools and the machine,
  • Storage of programs with alpha-numerical names and recalling,
  • Programmable bending speeds,
  • Manual, semi-automatic or automatic working modes,
  • Upper beam tilting for conical bending.

Standard Equipment

• Rigid Mono block, Welded ST44 A1 Steel ,
• Four axis (Y1, Y2, X, R),
• Standard graphic controllers can be selected from:
  • Cybelec Mod Eva 10 S
  • Color graphics with PC2100
  • Delem DA66W 2D with colored graphics
  • Esa Kvara Duemilla 2003
• Back gauge system with X + R axis driven by AC servo motors on linear bearing,
• Original BOSCH - REXROTH or HOERBIGER servo hydraulic system,
• Wila manual bottom table anti-deflection system,
• Electrical panel with cooling system, designed to meet CE Standards and composed of automation and electrical equipment with SIEMENS brand,
• Hardened and Ground standard sectioned top and bottom tools (835mm). Bottom tool is in 60x60 dimensions and a 4 V-die,
• Amada Promecam type tool holding system with quick release,
• Ergonomic, user friendly, moveable control panel carrying all buttons,
• Back light guards (categoy-4),
• Synchronization of Y1 + Y2 axis is provided by linear encoders with 0.01 tolerances,
• Back gauge fingers move along linear bearing with 0.01 tolerances,
• Foot pedal conforming to CE regulation,
• Front arms with T slot and mm/inch rulers,
• Throat depth 400 mm

Optional Equipment

• Graphic controllers:
  • Cybelec ModEva15 3D,
  • Cybelec ModEva12 3D,
  • Delem 69W 3D,
• Z1 + Z2 axis,
• X1 + X2 axis,
• R1 + R2 axis,
• Motorized Wila Anti-Deflection System with operates automatically with CNC unit according to tonnage applied,
• Front light guard system (categoy-4),
• Laser protection system dor die area:
  • LASER SAFE LXS AKASII,
  • SICK V 4000 (Camera Based System),
  • DFS LASER,
• Laser angle measurement system, with data M Cobra Lazer Check System,
• Pneumatic top tool holding system,
• Hydraulic top and bottom tool holding system,
• Front arms with CNC control (AP3+AP4 axis),
• Sliding front arms with bearing rollers,
• Hydraulic oil cooler,
• Automatic slide greasing system,
• Special throat depth 500, 600 or 750 mm),
• Special top and bottom tools,
• Software options:
  • Delem V-Bend,
  • V DFX modul,
  • V-Draw
• Delem profile on windows (profile W),
• SICK C4000 Advanced Finger Protection 14 mm (Easy Programmable Sick Soft with PC: Blanking, Reduced Resolution, Cascade working, etc),
• Tandem Application