Model: 030

•  High quality bends, even with tubes and profiles with thin wall thicknesses.
•  Small bending radii.
•  Very robust cast steel tooling and ancillary Structures ensure rigidity and precision of bend.
•  Low cost, quick set-up, precast tooling.
•  Simple to use with all controls, including those for the pneumatic chuck positioned on control panel incorporated into the machine body.
• Hydraulic clamp die, pressure die and mandrel extraction.
•  Programmable anticipated mandrel retraction for optimum bend quality
•  Semi-automatic operation
•  Digital programming system for bend and springback angles- 10 programs of 9 bending angles each.

•  Capacity: varies according to the tube material and wall thickness: from diam. 10 mm. (3/8" OD.) to 76 mm (2" 3/8 O.D.); minimum wall thickness 1 mm. (0.039"), maximum wall thickness 3,5 mm.
•  Minimum bending radius: 1,3 x external diameter of tube (depending on tube material, wall thickness and tube external diameter).
•  Maximum bending radius: 180 mm.
•  Maximum bending angle: 180°
•  Accuracy: 3 axis (x-y-z) bending control.
•  Applications: Ideal for stainless steel tubes and other tubes with thin wall thicknesses where a high quality bend is required with a small bend radius.