TigerStop® is an affordable, programmable, simple to use, Automated digital
Stop/Gauge and Pusher System. With the addition of the ADVANCED INTERLOCK
KIT [AIK], some equipment becomes "semi-automated".
Originally designed and promoted to serve the wood industry, the TigerStop®
shall serve the metal fabrication industry well. TigerStop® brings automated
gauging to equipment which had never dared it possible. Your shop - your needs
and TigerStop®.
Explore TigerStop®'s easy to use interface.
Explore TigerStop®'s accessories, see how
the job gets easier
Explore TigerStop®'s specifications.
+
=
Production
Accurate Cuts, Faster and
with your existing equipment
TigerStop® is an affordable, programmable, simple to use, Automated digital
Stop/Gauge and Pusher System. With the addition of the ADVANCED INTERLOCK
KIT [AIK], some equipment becomes "semi-automated".
Originally designed and promoted to serve the wood industry, the TigerStop®
shall serve the metal fabrication industry well. TigerStop® brings automated
gauging to equipment which had never dared it possible. Your shop - your needs
and TigerStop®.
Explore TigerStop®'s easy to use interface.
Explore TigerStop®'s accessories, see how
the job gets easier
Explore TigerStop®'s specifications.
+
=
Production
Accurate Cuts, Faster and
with your existing equipment
TigerStop®
Basic Setup Concepts
There are a few points to be made that apply to all TigerStop setups and should be considered
when placing an order.
1. TigerStop length is the range of movement, not the overall net length of the fence, which
is 24” longer. When planning your work station, be sure to allow for this additional length.
Example: TigerStop06 has a range of 6 feet (72”) and an overall net length of 96”.
2. TigerStop is ambidextrous—It can be used on the right or the left side of your saw or other
equipment. TigerStop, as it comes in the box, is set up as a LEFT handed machine. To use it
as a RIGHT handed machine, simply flip it over. Full details on installation and setup are provided
in the TigerStop Manual.
3. TigerStop can be mounted to TigerStop tables or your existing tables. TigerStop tables are
designed for ease of installation. Mount TigerStop directly to the table top without brackets.
When using your existing table, mount TigerStop either to the top or to the back edge. For back
edge mounting, use TigerStop attachment brackets.
Quantity of brackets depends on the overall length.
4. Infeed/Outfeed Tables: The terms “infeed” and “outfeed” have to do with direction of material
flow. When TigerStop is used as a set point stop, the side it is mounted on is called “outfeed”
because the finished pieces come out between the saw blade and the flipaway stop. When TigerStop
is used as a push feeder, the side it is mounted on is called “infeed” because the material
is loaded there, and the finished pieces come out on the other side of the saw or other processing
machine. Keep this in mind in the setups which follow, when “infeed” and “outfeed” tables are
described.
5. Mounting TigerStop Feed Tables to Other Equipment. Our feed tables are designed to be supported
by a freestanding machine at one end. It is necessary to drill and tap holes in most equipment
to attach the feed tables. Many upcut saws have a 45-degree bevel on the outfeed/infeed side.
We recommend that you cope the tables into the beveled area so that small pieces of wood do
not jamb during operation. Though this takes a bit more time, it will prove worth the effort
in the long run. (This is not necessary if you are using a flat-top Whirlwind saw.) TigerStop
may in some circumstances interfere with the saw guard, which must be modified to accommodate
this. In some situations an extra leg set must be used to support the table instead of bolting
it to the machine. It is the installer’s responsibility to meet all safety requirements and
correct any inherently dangerous situations to meet not only the letter of the law but common
sense.
6. Powering the TigerStop requires an isolated 110v 50-60Hz AC outlet, with a line filter surge
protector, available from TigerStop LLC.
7. Using TigerStop with a PLC or Computer. A variety of computer related applications is possible
with TigerStop when equipped with its higher level software options.
TigerSet Communication “Level Two” allows TigerStop to be connected to a PLC or computer via
an RS232 serial link and controled by custom programming. Your program not only can control
the TigerStop, but it can also read and write two I/O’s! This allows additional control for
machine cycles, pneumatic clamps, sensors. A world of simple automation solutions in one performance-balanced
package!
TigerLink Download Software provides the necessary interface between TigerStop and your computer
to allow the downloading of cut list data for use with TigerOptimizer and the Label Printer.
TigerOptimizer “Level Three” provides an easy solution for defect optimizing. Use any grade
of lumber and cost-effectively optimize it. Your machine operator will produce more with less
labor and raw material than ever before.
TigerOptimizer and Label Printer “Level Four” adds the extra benefit of immediate label output
for your cut parts. Print all the data you need to see about each part on thermal self-adhesive
labels for further milling or sorting.
TigerStop is the inexpensive, reliable way to increase your output without hiring additional
personnel!
The position can be input in the method of your choice: standard, metric, fraction, decimal,
feet, inches and in multiple languages. The controller computes the input and displays the position
in decimal inches or metric.
TigerStop® Specifications
Basic
Heavy Duty
Working lengths
4’, 6’, 8’, 10’, 12’, 16’, 20', 22’, 24'
16', 23', 30', 36'... & out (in 2 meter sections) to 250'+
Overall Dimensions:
6’, 8’, 10’, 12’, 14', 18', 22’, 24', 26'
2 feet more than the working length
Fence Dimensions:
4.125" x 4.125"
Motor Box Dimension:
5.5 " x 4.25" x 10.75"
Power Requirements:
110v @ 15 amps, isolated circuit
110v @15amps
Frequency:
50/60 Hz
50/60 Cycles
Optional Intl Power:
Yes
Yes
Motor Type:
DC servo with optical encoder
DC servo with optical encoder
Drive Type:
Belt Drive
Rack & Pinion
Drive Speed:
Adjustable 1” ~ 35” /sec
Adjustable 5” ~ 15”/sec
Repeatability:
±0.004” (4/1000”)
±0.008” (8/1000”)
:Display Type:
2 Line High Contrast LCD
2 Line High Contrast LCD
Serial Interface:
Yes
Yes
Number of Saved
Cut Lists:
Total possible cut parts is just under 2 million:
2000 different sizes across 99 Cut Lists in quantities of 998 for each size. (No one cut list
can have more than 1000 different sizes.
Number of Saved
Programs:
Can be used with punch presses, drills, tube benders, and other equipment for sequence positioning.
Up to 99 different positioning programs can be saved and re-used
Number of Programs:
100
Lines of Data:
2000+
2000+
Standard Features:
Multi-Offset/Allows for multiple zero points
Set Point Back Stop Mode
Kerf Compensation
Electronic zero point calibration
Full Diagnostic suite
Fully configured for push feeding
Multi-Lingual
Input feet, inches, fractions, decimal inches and metric
Pattern Mode
Increment Function
Programmable
Back Rabbet Compensation
Inches and Metric
Set Point Stop Mode
Push Feed Mode
Pattern Mode
Increment Function
Programmable
-1. Hot Keys
-2. Cut Lists
Upgrade Options:
Expanded I/O – 8 total
Bar Code Reader
TigerOptimizer
Data Downloading
Label Printing
Double-ended TigerStop option
Interlock
-1.Standard
-2 Advanced
RS323 Port
Bar Code Reader
TigerOptimizer
Data Downloading
Label Printing
Multi-Languages
Accessories can further be broken down as:
Tables and Related
Stop/Pusher Attachments
Safety & Automation
Software Upgrades
Tables and Related
TABNR #
SOLID TOP TABLES
14 1/2” wide, 3/16” steel top surface with 3” side overhangs; can be used for
infeed or outfeed tables.
TABR #
ROLLER TOP TABLES
14 1/2” wide, 3/16” steel top surface with rollers 8” wide on 12” centers; can
be used for infeed or outfeed tables.
LSU
LEDGE STAND The ledge stand is ideal for face frame kitchen cabinet doorframe
manufacturing. The narrow table allows the operator to maintain his grip
on the part on the out feed side, thereby allowing him to quickl stack the
part. The ledge stand will provide a noticeable increase in productivity
over a wide flat table because the operator does not have to fumble to get
the pieces off the table.
BF
BACK FENCE
144” long, steel, V-shaped fence; mounts to the table opposite your TigerStop
to assist in material handling.(back fence extender bfe)
BRLR-BRRL
BACK RULE
Attached to the back fence/extender for use during the Set Point Optimizing
operations (Left or Right).
TABTILT
TILTED TABLES
Cradles material against the stop so that when pushing material to the saw,
material does not move away from the fencd/stop.
TB
TILTED SAW BASE
Supports the machinery at a 10„ tilt, keeping the saw in line with the tilted
tables during material processing.
BR3X3
ATTACHMENT BRACKET
Pre-drilled, steel, L-shaped bracket used to secure TigerStop’s beam to your
table’s surface. (not required with TigerStop tables)
PS
PRINTER STAND
Printer Stand coming down the pike! Available Sept 1,2003
CS/CSR
CONTROL STAND
Used for mounting the controler for easier reading of the screen or for holding
the printer when attaching labels.
FREE-STANDING SYSTEMS
TABLEG
EXTRA LEG SETS
Used in creating a free standing table or an extra leg for center support.
SS24
SAW SUPPORT
24” wide,18” deep pre-drilled steel plates support equipment between two TS
tables.(2-TABLEG required)
SPECIAL HANDLING
TABR-P
COATED ROLLERS
8” wide plastic coated rollers can be used in place of the regular steel roller
inserts in the roller tables.
SAFETY AND AUTOMATION COMPONENTS
LF
LINE FILTER
Protects your TigerStop from damage due to electrical noise present in most
shops.
SIK
STANDARD INTERLOCK KIT
Primary function of the IK2 is a safety feature, detecting the position of the
saw and ensuring the TigerStop is not moving at the same time. It also can make
your process semi-automatic.*
AIK
ADVANCED INTERLOCK KIT
The Advanced Interlock is a component whose use requires higher knowledge. Design
of systems using this component requires that the designer/engineer knows and
is able to implement this component into his design in such a manner as to fulfill
all federal, state and local safety requirements. *same for IK2
STOP AND PUSHER ATTACHMENTS
PF
PUSHER FOOT
Attached to the flipaway stop, this 4” wide, molded PVC accessory extends the
range 10”.
PM
MITRE GAUGE
Attached to the flipaway stop, this molded PVC 45„-angledaccessory extends the
range 10”.
GSX
GANG STOP
Attached to the flipaway stop, this L-shaped, 10 3/4” wide accessory is used
when multiple pieces are being processed. This includes a spring buffer, which
protects the machine against sudden impact and will extend the belt life, while
helping to maintain accuracy.
EA
EXTENDED ARM
Attached to the flipaway stop, this accessory, used with the pusher foot or
mitre gauge, extends the range by 36". This includes a shock absorber, which
protects the machine against sudden impact and will extend the belt life, while
helping to maintain accuracy.
SPECIAL APPLICATIONS
PM
PUSHER MITRE
Used with the double mitre saws to push material in a front fence setup.
SB
SPRING BUFFER
Attached to the flipaway stop, absorbs the shocks that are generated during
heavy material processing.
SOFTWARE UPGRADES
SET
LEVEL 2 UPGRADE
TIGERSET LEVEL 2
Permits operation of the TigerStop from a remote location with your software
and your PC.
BCP
LEVEL 2 UPGRADE
BARCODE READER
Allows you to input barcoded dimensions into TigerStop.
OPT
LEVEL 3 UPGRADE
TIGER OPTIMIZER AND TIGERLINK
Upgrade to basic software that adds cutlist download capabilities and the high-powered
optimization program.
SHM
LEVEL 3 UPGRADE
SHORT HAUL MODEM
Ensures uninterrupted communications between your computer and the TigerStop
through RS232 port. (required if farther than 75 ft. apart)
PRINT 2 / PRINT 4
LEVEL 4 UPGRADE
2" OR 4" LABEL PRINTER
Immediately prints labels for each part with user-determined fields.
SOFTWARE/HARDWARE UPGRADES
TDE
DOUBLE ENDED TIGERSTOP
Upgraded controller option that allows swapping of the zero end point (permitting
one TS to service two machines).
TigerStop® is an affordable, programmable, simple to use, Automated digital
Stop/Gauge and Pusher System. With the addition of the ADVANCED INTERLOCK
KIT [AIK], some equipment becomes "semi-automated".
Originally designed and promoted to serve the wood industry, the TigerStop®
shall serve the metal fabrication industry well. TigerStop® brings automated
gauging to equipment which had never dared it possible. Your shop - your needs
and TigerStop®.
Explore TigerStop®'s easy to use interface.
Explore TigerStop®'s accessories, see how
the job gets easier
Explore TigerStop®'s specifications.
+
=
Production
Accurate Cuts, Faster and
with your existing equipment
TigerStop® is an affordable, programmable, simple to use, Automated digital
Stop/Gauge and Pusher System. With the addition of the ADVANCED INTERLOCK
KIT [AIK], some equipment becomes "semi-automated".
Originally designed and promoted to serve the wood industry, the TigerStop®
shall serve the metal fabrication industry well. TigerStop® brings automated
gauging to equipment which had never dared it possible. Your shop - your needs
and TigerStop®.
Explore TigerStop®'s easy to use interface.
Explore TigerStop®'s accessories, see how
the job gets easier
Explore TigerStop®'s specifications.
+
=
Production
Accurate Cuts, Faster and
with your existing equipment
TigerStop®
Basic Setup Concepts
There are a few points to be made that apply to all TigerStop setups and should be considered
when placing an order.
1. TigerStop length is the range of movement, not the overall net length of the fence, which
is 24” longer. When planning your work station, be sure to allow for this additional length.
Example: TigerStop06 has a range of 6 feet (72”) and an overall net length of 96”.
2. TigerStop is ambidextrous—It can be used on the right or the left side of your saw or other
equipment. TigerStop, as it comes in the box, is set up as a LEFT handed machine. To use it
as a RIGHT handed machine, simply flip it over. Full details on installation and setup are provided
in the TigerStop Manual.
3. TigerStop can be mounted to TigerStop tables or your existing tables. TigerStop tables are
designed for ease of installation. Mount TigerStop directly to the table top without brackets.
When using your existing table, mount TigerStop either to the top or to the back edge. For back
edge mounting, use TigerStop attachment brackets.
Quantity of brackets depends on the overall length.
4. Infeed/Outfeed Tables: The terms “infeed” and “outfeed” have to do with direction of material
flow. When TigerStop is used as a set point stop, the side it is mounted on is called “outfeed”
because the finished pieces come out between the saw blade and the flipaway stop. When TigerStop
is used as a push feeder, the side it is mounted on is called “infeed” because the material
is loaded there, and the finished pieces come out on the other side of the saw or other processing
machine. Keep this in mind in the setups which follow, when “infeed” and “outfeed” tables are
described.
5. Mounting TigerStop Feed Tables to Other Equipment. Our feed tables are designed to be supported
by a freestanding machine at one end. It is necessary to drill and tap holes in most equipment
to attach the feed tables. Many upcut saws have a 45-degree bevel on the outfeed/infeed side.
We recommend that you cope the tables into the beveled area so that small pieces of wood do
not jamb during operation. Though this takes a bit more time, it will prove worth the effort
in the long run. (This is not necessary if you are using a flat-top Whirlwind saw.) TigerStop
may in some circumstances interfere with the saw guard, which must be modified to accommodate
this. In some situations an extra leg set must be used to support the table instead of bolting
it to the machine. It is the installer’s responsibility to meet all safety requirements and
correct any inherently dangerous situations to meet not only the letter of the law but common
sense.
6. Powering the TigerStop requires an isolated 110v 50-60Hz AC outlet, with a line filter surge
protector, available from TigerStop LLC.
7. Using TigerStop with a PLC or Computer. A variety of computer related applications is possible
with TigerStop when equipped with its higher level software options.
TigerSet Communication “Level Two” allows TigerStop to be connected to a PLC or computer via
an RS232 serial link and controled by custom programming. Your program not only can control
the TigerStop, but it can also read and write two I/O’s! This allows additional control for
machine cycles, pneumatic clamps, sensors. A world of simple automation solutions in one performance-balanced
package!
TigerLink Download Software provides the necessary interface between TigerStop and your computer
to allow the downloading of cut list data for use with TigerOptimizer and the Label Printer.
TigerOptimizer “Level Three” provides an easy solution for defect optimizing. Use any grade
of lumber and cost-effectively optimize it. Your machine operator will produce more with less
labor and raw material than ever before.
TigerOptimizer and Label Printer “Level Four” adds the extra benefit of immediate label output
for your cut parts. Print all the data you need to see about each part on thermal self-adhesive
labels for further milling or sorting.
TigerStop is the inexpensive, reliable way to increase your output without hiring additional
personnel!
The position can be input in the method of your choice: standard, metric, fraction, decimal,
feet, inches and in multiple languages. The controller computes the input and displays the position
in decimal inches or metric.
TigerStop® Specifications
Basic
Heavy Duty
Working lengths
4’, 6’, 8’, 10’, 12’, 16’, 20', 22’, 24'
16', 23', 30', 36'... & out (in 2 meter sections) to 250'+
Overall Dimensions:
6’, 8’, 10’, 12’, 14', 18', 22’, 24', 26'
2 feet more than the working length
Fence Dimensions:
4.125" x 4.125"
Motor Box Dimension:
5.5 " x 4.25" x 10.75"
Power Requirements:
110v @ 15 amps, isolated circuit
110v @15amps
Frequency:
50/60 Hz
50/60 Cycles
Optional Intl Power:
Yes
Yes
Motor Type:
DC servo with optical encoder
DC servo with optical encoder
Drive Type:
Belt Drive
Rack & Pinion
Drive Speed:
Adjustable 1” ~ 35” /sec
Adjustable 5” ~ 15”/sec
Repeatability:
±0.004” (4/1000”)
±0.008” (8/1000”)
:Display Type:
2 Line High Contrast LCD
2 Line High Contrast LCD
Serial Interface:
Yes
Yes
Number of Saved
Cut Lists:
Total possible cut parts is just under 2 million:
2000 different sizes across 99 Cut Lists in quantities of 998 for each size. (No one cut list
can have more than 1000 different sizes.
Number of Saved
Programs:
Can be used with punch presses, drills, tube benders, and other equipment for sequence positioning.
Up to 99 different positioning programs can be saved and re-used
Number of Programs:
100
Lines of Data:
2000+
2000+
Standard Features:
Multi-Offset/Allows for multiple zero points
Set Point Back Stop Mode
Kerf Compensation
Electronic zero point calibration
Full Diagnostic suite
Fully configured for push feeding
Multi-Lingual
Input feet, inches, fractions, decimal inches and metric
Pattern Mode
Increment Function
Programmable
Back Rabbet Compensation
Inches and Metric
Set Point Stop Mode
Push Feed Mode
Pattern Mode
Increment Function
Programmable
-1. Hot Keys
-2. Cut Lists
Upgrade Options:
Expanded I/O – 8 total
Bar Code Reader
TigerOptimizer
Data Downloading
Label Printing
Double-ended TigerStop option
Interlock
-1.Standard
-2 Advanced
RS323 Port
Bar Code Reader
TigerOptimizer
Data Downloading
Label Printing
Multi-Languages
Accessories can further be broken down as:
Tables and Related
Stop/Pusher Attachments
Safety & Automation
Software Upgrades
Tables and Related
TABNR #
SOLID TOP TABLES
14 1/2” wide, 3/16” steel top surface with 3” side overhangs; can be used for
infeed or outfeed tables.
TABR #
ROLLER TOP TABLES
14 1/2” wide, 3/16” steel top surface with rollers 8” wide on 12” centers; can
be used for infeed or outfeed tables.
LSU
LEDGE STAND The ledge stand is ideal for face frame kitchen cabinet doorframe
manufacturing. The narrow table allows the operator to maintain his grip
on the part on the out feed side, thereby allowing him to quickl stack the
part. The ledge stand will provide a noticeable increase in productivity
over a wide flat table because the operator does not have to fumble to get
the pieces off the table.
BF
BACK FENCE
144” long, steel, V-shaped fence; mounts to the table opposite your TigerStop
to assist in material handling.(back fence extender bfe)
BRLR-BRRL
BACK RULE
Attached to the back fence/extender for use during the Set Point Optimizing
operations (Left or Right).
TABTILT
TILTED TABLES
Cradles material against the stop so that when pushing material to the saw,
material does not move away from the fencd/stop.
TB
TILTED SAW BASE
Supports the machinery at a 10„ tilt, keeping the saw in line with the tilted
tables during material processing.
BR3X3
ATTACHMENT BRACKET
Pre-drilled, steel, L-shaped bracket used to secure TigerStop’s beam to your
table’s surface. (not required with TigerStop tables)
PS
PRINTER STAND
Printer Stand coming down the pike! Available Sept 1,2003
CS/CSR
CONTROL STAND
Used for mounting the controler for easier reading of the screen or for holding
the printer when attaching labels.
FREE-STANDING SYSTEMS
TABLEG
EXTRA LEG SETS
Used in creating a free standing table or an extra leg for center support.
SS24
SAW SUPPORT
24” wide,18” deep pre-drilled steel plates support equipment between two TS
tables.(2-TABLEG required)
SPECIAL HANDLING
TABR-P
COATED ROLLERS
8” wide plastic coated rollers can be used in place of the regular steel roller
inserts in the roller tables.
SAFETY AND AUTOMATION COMPONENTS
LF
LINE FILTER
Protects your TigerStop from damage due to electrical noise present in most
shops.
SIK
STANDARD INTERLOCK KIT
Primary function of the IK2 is a safety feature, detecting the position of the
saw and ensuring the TigerStop is not moving at the same time. It also can make
your process semi-automatic.*
AIK
ADVANCED INTERLOCK KIT
The Advanced Interlock is a component whose use requires higher knowledge. Design
of systems using this component requires that the designer/engineer knows and
is able to implement this component into his design in such a manner as to fulfill
all federal, state and local safety requirements. *same for IK2
STOP AND PUSHER ATTACHMENTS
PF
PUSHER FOOT
Attached to the flipaway stop, this 4” wide, molded PVC accessory extends the
range 10”.
PM
MITRE GAUGE
Attached to the flipaway stop, this molded PVC 45„-angledaccessory extends the
range 10”.
GSX
GANG STOP
Attached to the flipaway stop, this L-shaped, 10 3/4” wide accessory is used
when multiple pieces are being processed. This includes a spring buffer, which
protects the machine against sudden impact and will extend the belt life, while
helping to maintain accuracy.
EA
EXTENDED ARM
Attached to the flipaway stop, this accessory, used with the pusher foot or
mitre gauge, extends the range by 36". This includes a shock absorber, which
protects the machine against sudden impact and will extend the belt life, while
helping to maintain accuracy.
SPECIAL APPLICATIONS
PM
PUSHER MITRE
Used with the double mitre saws to push material in a front fence setup.
SB
SPRING BUFFER
Attached to the flipaway stop, absorbs the shocks that are generated during
heavy material processing.
SOFTWARE UPGRADES
SET
LEVEL 2 UPGRADE
TIGERSET LEVEL 2
Permits operation of the TigerStop from a remote location with your software
and your PC.
BCP
LEVEL 2 UPGRADE
BARCODE READER
Allows you to input barcoded dimensions into TigerStop.
OPT
LEVEL 3 UPGRADE
TIGER OPTIMIZER AND TIGERLINK
Upgrade to basic software that adds cutlist download capabilities and the high-powered
optimization program.
SHM
LEVEL 3 UPGRADE
SHORT HAUL MODEM
Ensures uninterrupted communications between your computer and the TigerStop
through RS232 port. (required if farther than 75 ft. apart)
PRINT 2 / PRINT 4
LEVEL 4 UPGRADE
2" OR 4" LABEL PRINTER
Immediately prints labels for each part with user-determined fields.
SOFTWARE/HARDWARE UPGRADES
TDE
DOUBLE ENDED TIGERSTOP
Upgraded controller option that allows swapping of the zero end point (permitting
one TS to service two machines).
TigerStop
The player is loaded in the off position. Press the forward arrow to begin the videos. Subsequent videos load and play automatically.
Questions and inquiries can be directed through our convienient Information Request Forms or by calling our Technology Center at 1-763-262-8070 or (Toll Free) at 1-800-827-3608
TigerStop®
Basic Setup Concepts
