Your source for Metal Fabricating Solutions
      Metal Fabricating Solutions		 AJ Machinery's Technolgy Center in Big Lake, MN 55309
spacer
Welcome Fellow Fabricator
E-Mail address: Password: (forgotten?)
Join Us and Create an account
spacer

CE50 ANGLE ROLL
Used Equipment Vendors
 Tips on Searching 
 Tax Savings Calculator
Your path/location ==>>   Home --» Pipe Benders Tube Benders --» ER-CE50H3

CE50 ANGLE ROLL
Catalog Number: ER-CE50H3

 Prices starting at:
Call for quote		 CE50 ANGLE ROLL
  Roller Bender
  • Robust structure in G30 cast steel with oversize drive shafts.
  • All models (manual and hydraulic) have digital display of center roll position. 
  • Electronic programming system for center roll position of 56 passes, standard for all hydraulic models
  • High working speed of 6 meters/min (20 ft/min) ensures high productivity
  • All models can work both horizontally as well as vertically
 ROLLER BENDER CE40 - CE50    View the Roll Tool Profiles here

ADVANTAGES OF THE ERCOLINA CE50-CE40 ROLLING MACHINES
  • Hydraulic cylinder for center roll adjustment is located under the frame of the machine to improve the machine performance
  • All models have electronic measurement of position of center roll, with accuracy ± 0,1mm and digital display
  • High productivity due to a rolling speed of 6 meters/min (20 ft/min)
 Ercolina Advantages
  • Twist corrector rolls for angle iron (leg out and leg in) can be fitted, both at fixed angle and variable angle
  • Oversize drive shafts in forged and tempered alloyed steel, mounted in conical roller bearings, reduce the number of passes to a minimum to achieve any given bend radius In line reduction gearbox in oil bath gives a very high power transmission efficiency
  • Body of machine is in G30 high grade cast steel, with a unique multi-plane design to maximize strength
  • All hydraulic versions are supplied as standard with an electronic programming system for the center roll position, with capacity to memorize 4 different programs of up to a 14 passes per program
  • All drive shafts are precision threaded to allow very fine adjustment of tooling gaps, WITHOUT the use of spacers
  • Low voltage controls satisfy all safety standards including CE European standards
  • Machines are MODULAR, and can be upgraded from 2 roll drive to 3 roll drive with a simple kit of parts
  • Special solutions for any bending problem can be developed on request

 

  

 

Specifications: CE 40 & CE 50

Rif.

 Profile

 Dimensions mm (inches)

 Min. Radius mm (inches)

Roll (type)

 Dimensions mm (inches)

 Min. Radius mm (inches)

Roll (type)

1

Tubing

 21 x 2,3 (1/2 G x 0,095") 48 x 3,2 (1 1/2G x 0,125") 60 x 3,2 (2"Gx0,125")

 
80(8")300 (12")400 (16")

RT
RT
RT - TI

26.9 x 2.3 3/4"G x 0.095")
60 x 3.9 (2.5" x 0.156")
76.1 x 3.6 (3" x 0.134")

100 (4")
400 (16")
600 (24")

RT
RT
RT

C2

Square Tubing

20 x 20 x 1.5 (0.8"x0.8"x0.058") 40 x 40 x 2 (1.6" x 1.6"x 0.078") 50 x 50 x 3 (2" x 2" x 0.125")

200 (8")
800 (32")
1000 (40")

 SR
SR
SR - TI

20 x 20 x 2 (0.8" x 0.8" x 0.065")
50 x 50 x 3 (2" x 2" x 0.120")
60 x 60 x 3 (2.5" x 2.4" x 0.120")

100 (4")
600 (24")
1000 (40")

 SR
SR - TI
SR - TI

3

30 x 10 x 1.5 (1.2" x 0.4" x 0.058")
40 x 20 x 2.5 (1.6" x 0.8" x 0.095")
50 x 25 x 2.5 (2" x 1" x 0.095")

200 (8")
500 (20")
700 (28")

SR
SR
SR - TI

25 x 10 x 2 (1" x 0.4" x 0.065")
60 x 40 x 3 (2.5" x 1.6" x 0.120")
80 x 30 x 3 (3.1" x 1.2" x 0.120")

100 (4")
600 (24")
1000 (40")

 SR
SR - TI
SR - TI

4

30 x 10 x 2 (1.2" x 0.4" x 0.078")
50 x 25 x 2.5 (2" x 18" x 0.095")
60 x 30 x 2.5 (2.5" x 1.2" x 0.095")

250 (10")
500 (20")
800 (32")

SR
SR - TI
SR - TI

25 x 10 x 2 (1" x 0.4" x 0.065")
60 x 40 x 3 (2.5" x 1.6" x 0.120")
80 x 30 x 3 (3.1" x 1.2" x 0.120")

100 (4")
600 (24)
1000 (40")

 SR
SR - TI
SR - TI

5

30 x 10 x 1.5 (1.2" x 0.4" x 0.058")
50 x 25 x 2.5 (2" x 1" x 0.095")

200 (8")
600 (24")

SR

SR

30 x 15 x 1.5 (1.2" x 0.6" x 0.058")
60 x 30 x 2.5 (2.5" x 1.2" x 0.095")

150 (6")
600 (24")

 SR
SR - TI

6

30 x 10 x 1.5 (1.2" x 0.4" x 0.058")
60 x 30 x 2.5 (2.5" x 1.2" x 0.095")

200 (8")
800 (32")

SR
SR - TI

30 x 15 x 1.5 (1.2" x 0.6" x 0.058")
60 x 30 x 2.5 (2.5" x 1.2" x 0.095")

150 (6")
600 (24")

 SR
SR - TI

7

20 (0.8")
28 (1.125")
30 (1.2")

80 (3")
150 (6")
300 (12")

RT
RT
RT

20 (0.8")
35 (1.4")
40 1.6")

100 (4")
200 (8")
380 (15")

RT
RT
RT

8

15 (0.6")
25 (1")
30 (1.2")

80 (3")
200 (6")
400 (16")

RS
RS
RS

15 x 15 (0;6" x 0.6")
30 x 30 (1.2" x 1.2")
35 x 35 (1.4" x 1.4")

100 (4")
200 (8")
250 (10")

RS
RS
RS

9

15 (0.6")
30 (1.2")

100 (4")
300 (12")

SR
SR

15 x 15 (0.6" x 0.6")
35 x 35 (1.4" x 1.4")

100 (4")
250 (10")

SR
SR

10

20 x 10 (1.5" x 0.4")
50 x 8 (1.2" x 0.312")
50 x 10 (1.2" x 0.4")

90 (3")
250 (10")
300 (12")

RS
RS
RS

20 x 10 (0.8" x 0.4")
50 x 12 (2" x 0.5")
60 x 12 (2.5" x 0.5")

100 (4")
180 (7")
300 (12")

RS
RS
RS

11

40 x 5 ((1.2" x 0.203")
60 x 15 (1.2" x 0.6")
60 x 20 (1.2" x 0.8")

100 (4")
125 (5")
250 (10")

RS
RS - TI
RS - TI

50 x 10 (2" x 0.4")
100 x 16 (4" x 0.6")
100 x 20 (4" x 0.8")

100 (4")
150 (5.9")
300 (12")

RS
RS - TI
RS - TI

12

30 x 30 x 3 (1.2" x 1.2" x 0.120")
40 x 40 x 3 (1.5" x 1.5" x 0.120")
50 x 50 x 6 (2" x 2" x 0.236")

130 (5")
250 10")
400 (16")

RS
RS
RS

25 x 25 x 4 (1" x 1" x 0.156")
50x 50 x 6 (2" x 2" x 0.236")
60 x 60 x 6 (2.5" x 2.5" x 0.236")

110 (4.3")
200 (8")
380 (15")

RS
RS
RS

13

30 x 30 x 3 (1.2" x 1.2" x 0.120")
40 x 40 x 4 (1.5" x 1.5" x 0.156")
50 x 50 x 6 (2" x 2" x 0.236")

150 (6")
200 (8")
500 (20")

RS
RS
RS

25 x 25 x 3 (1" x 1" x 0.120")
50x 50 x 6 (2" x 2" x 0.236")
60 x 60 x 6 (2.5" x 2.5" x 0.236")

110 (4.3")
200 (8")
400 (16")

RS
RS
RS

14

30 x 30 x 3 (1.2" x 1.2" x 0.120")
40 x 40 x 5 (1.5" x 1.5" x 0.203")
50 x 50 x 6 (2" x 2" x 0.236")

100 (4")
200 (8")
300 (12")

RS
RS - TI
RS - TI

30x 30 x 3 (1.2" x 1.2" x 0.120")
50x 50 x 6 (2" x 2" x 0.236")
60 x 60 x 6 (2.5" x 2.5" x 0.236")

100 (4")
200 (8")
250 (10")

RS
RS - TI
RS - TI

15

30 x 30 x 3 (1.2" x 1.2" x 0.120")
40 x 40 x 5 (1.5" x 1.5" x 0.203")
50 x 50 x 6 (2" x 2" x 0.236")

150 (4")
250 (10")
350 (14")

RS
RS - TI
RS - TI

30x 30 x 3 (1.2" x 1.2" x 0.120")
50x 50 x 6 (2" x 2" x 0.236")
60 x 60 x 6 (2.5" x 2.5" x 0.236")

100 (4")
200 (8")
250 (10")

RS
RS - TI
RS - TI

16

30 x 15 x 4 (1.2" x 0.6" x 0.156")
50 x 25 x 5 (2" x 1" 0.203")
60 x 30 x 6 (2.5" x 1.2" x 0.236")

100 (4")
250 (10")
300 (12")

SR
SR - TI
SR - TI

30 x 15 x 4 (1.2" x 0.6 x 0.156")
60 x 30 x 6 (2.5" x 1.2" x 0.236")
80 x 45 x 6 (3.1" x 1.8" x 0.236")

100 (4")
200 (8")
300 (12")

SR
SR - TI
SR - TI

17

30 x 15 x 4 (1.2" x 0.6" x 0.156")
40 x 20 x 5 (2" x 0.8" 0.203")
60 x 30 x 6 (2.5" x 1.2" x 0.236")

125 (5")
250 (10")
350 (14")

SR
SR - TI
SR - TI

40 x 20 x 5 (1.6" x 0.8" x 0.203")
50 x 25 x 5 (2" x 2" x 0.203")
80 x 45 x 6 (3.1" x 1.8" x 0.236")

120 (5")
200 (8")
300 (12")

SR
SR - TI
SR - TI

18

30 x 15 x 4 (1.2" x 0.6" x 0.156")
40 x 20 x 5 (2" x 0.8" 0.203")
60 x 30 x 6 (2.5" x 1.2" x 0.236")

300 (12')
350 (14")
1200 (48")

RS
RS
RS

30 x 15 x 4 (1.2" x 0.6" x 0.156")
40 x 20x 5 (1.6" x 0.8" x 0.203")
60 x 30 x 5 (2.5" x 1.2" x 0.203")

350 (14")
400 (16")
1400 (55")

SR
SR - TI
SR - TI
  Key to table:
  RS= Set of standard universal roll.
  RT= Set of rolls for solid profiles.
  SR= Set of special rolls.
  TI= Tie bar to increase shaft rigidity.
Note: The minimum radii quoted refer to material of tensile strength45Kg/mm2 and are obtained with one or more rolling passes. The high rigidity and strength of machine allows a minimum number of passes.
ACCESSORIES AVAILABLE ON REQUEST
  
With Accessories, you can do this............

 

 TECHNICAL CHARACTERISTICS

 CE 40MR2

 CE 40H2

 CE 40MR3

 CE 40H3

 CE 50MR2

 CE 50H2

 CE 50MR3

 CE 50H3
SHAFT DIAMETER mm (inches)

 40 (1,6")

 40 (1,6")

 40 (1,6")

 40 (1,6")

 50 (2")

50 (2")

50 (2")

50 (2")
DIAMETER OF STANDARD ROLLS mm (inches))

165 (6.6")

 165 (6.6")

 165 (6.6")

 165 (6.6")

 178 (7")

 178 (7")

  178 (7")

  178 (7")
SHAFT RPM

12/14

12/14

12/14

12/14

11/13

11/13

11/13

11/13
MOTOR POWER

 1,5 HP

 1,5 HP

 1,5 HP

 1,5 HP

 2,5 HP

 2,5 HP

 2,5 HP

 2,5 HP
HYD. POWER PACK

1 HP

 1 HP

 2,5 HP

 2,5 HP
PISTON HYDRAULIC FORCE (tons)

 8,5

 8,5

 10

10
NUMBER OF DRIVING ROLLS/TYPE

 2/knurled

 2/knurled

 3/smooth

 3/smooth

 2/knurled

 2/knurled

 3/smooth

 3/smooth
MACHINE WORKING POSITION

 horiz.- vert.

horiz.- vert.

horiz.- vert.

horiz.- vert.

horiz.- vert.

 horiz.- vert.

 horiz.- vert.

horiz.- vert.
CENTER ROLL REGULATION

 Manual

 Hydraulic

 Manual

 Hydraulic

 Manual

 Hydraulic

 Manual

Hydraulic
DISPL/MEASUR. OF CENTER. ROLL POSIT

 LCD

 Digital

 LCD

 Digital

 LCD

 Digital

 LCD

 Digital
BASE INCLUDED

 YES

 YES

 YES

YES

YES

YES

YES

YES
FOOT PEDAL CONTROL

YES

YES

YES

YES

YES

YES

YES

YES
STRUCTURE OF BODY OF MACHINE

CAST Steel G30

CAST Steel G30

CAST Steel G30

CAST Steel G30

CAST Steel G30

CAST Steel G30

CAST Steel G30

CAST Steel G30
OVERALL DIMENSIONS (cm/inches)

65 x 95 x 143
22" x 39" x 56"

65 x 95 x 127
22" x 39" x 50"

65 x 95 x 143
22" x 39" x 56"

65 x 95 x 127
22" x 39" x 50"

65 x 95 x 143
26" x 37" x 56"

65 x 95 x 116
26" x 37" x 46"

65 x 95 x 143
26" x 37"x 56"

65 x 95 x 116
26" x 37" x 46"
MAX. PIPE BENDING CAP. (pipe inches)

2" x 3,2 mm
2" x 0.134"

2" x 3,2 mm
2" x 0.134"

2" x 3,2 mm
2" x 0.134"

2" x 3,2 mm
2" x 0.134"

2.5" x 3,6 mm
2.5" x 0.134

2.5" x 3,6 mm
2.5" x 0.134

2.5" x 3,6 mm
2.5" x 0.134

2.5" x 3,6 mm
2.5" x 0.134
MAX. ANGLE IRON CAP. (mm/inches)

50 x 50 x 6
2"x 2" x 0.236"

50 x 50 x 6
2"x2" x0.236"

50 x 50 x 6
2"x2" x0.236"

50 x 50 x 6
2"x2" x0.236"

60 x 60 x 6
2.5"x2.5 x0.236"

60 x 60 x 6
2.5"x2.5 x0.236"

60 x 60 x 6
2.5"x2.5 x0.236"

60 x 60 x 6
2.5"x2.5 x0.236"
WEIGHT Kg (pounds)

 265 (583)

 290 (638)

 275 (605)

 300 (660)

 470 (1034)

 490 (1056)

 480 (1056)

 500 (1100)
 

  

     LCD = Digital LCD display of center roll position incorporated in pedal control stand
  Digital = 56 cycle digital bending programming processor (4 programs of 14 steps each)
  Manual  = Power control of center movement through manual reduction gearbox
  Hydraulic = Hydraulic movement of center roll position

Previous Page...

Accessories available upon request

COD. CE40

COD. CE50

DESCRIPTION

C4ST

C5ST

 STANDARD UNIVERSAL TOOLING SET, COMPLETE WITH FEMALE THREADED FLANGE FOR TOOL ADJUSTMENT.

C4SP

C5SP

 ROLL SET FOR PROFILES AND SPECIAL APPLICATIONS.

C4AL

C5AL

 ROLL SET FOR ALUMINIUM TUBES AND PROFILES.

C4A1

C5A1

 KIT TO UPGRADE FROM TWO TO THREE ROLLER DRIVE.

  CP5A2

  CP5A2

 TIE BAR TO SUPPORT ROLL SHAFT (S).

C4A3

C5A3

 SET OF 3 LONGER DRIVE SHAFTS.

C4A4

C5A4

 ANTI-TWIST DEVICE FOR ANGLE IRON.

  C4A5

C5A5

MECHANICAL CENTRE ROLL STOP FOR "MR" MODELS.

  C4A10

  C5A10

 UNIVERSAL PRESS FOR CE WITH PRISM SHAPED TOOLING TO BEND UP TO 90° (OTHER TOOLING AVAILABLE UPON REQUEST).
 

 Art. CE40

 Art. CE50

3 roll set of tooling for tubes (from ø to ø)

Tubing

 Art. CE40

 Art. CE50

3 roll set of tooling for square and rectangular profiles(from ø to ø) Square Tubing

C401A

C501A

5 - 20 (0.2"- 0.8")

C402A

>C502A

5 - 20 (0.2"- 0.8")

C401B

C501B

21 - 30 (0.9"- 1.2")

C402B

>C502B

21 - 30 (0.9"- 1.2")

C401C

C501C

31 - 40 (1.3"- 1.6")

C402C

C502C

31 - 40 (1.3"- 1.6")

C401D

C501D

41 - 50 (1.7"- 2.0")

C402D

C502D

41 - 50 (1.7"- 2.0")

C401D

C501D

41 - 50 (1.7"- 2.0")

C402D

C502D

41 - 50 (1.7"- 2.0")

C401D

C501D

41 - 50 (1.7"- 2.0")

C402D

C502D

41 - 50 (1.7"- 2.0")
C401E C501E 51 - 60 (2.1"- 2.4") - C502E 51 - 60 (2.1"- 2.4")
 - C501F 61 - 76 (2.5"- 3.0")  -  - -

CE50 ANGLE ROLL was updated on Wednesday 06 August, 2008.spacer
Product 6 of 18
Previous Item     Back to category list     Next Item
Comment Call
Thank you for viewing this CE50 ANGLE ROLL information. If you need any more information regarding CE50 ANGLE ROLLs feel free to contract us.
spacer Products by Category spacer
spacer
Bandsaws
Band Saw Blades
Beam Lines
CNC Gauging
Cold Saws
Consumables
Folding Machines
Hand Brakes
HVAC Equipment
Ironworkers
Ironworker Tooling
Laser Cutters
Laser Marking Systems
Material Handling
Notching Equipment
Pipe Benders Tube Benders
spacer105B THE BRUTE
spacercml Tooling
spacerHB302 One Shot Hydraulic Bender
spacerHMP200 Hand Pump Hydraulic Bender
spacerHossfeld Model No.2 Bender
spacerIneco Tooling and Parts
spacerLarge Radius Bender
spacerPro Model 105 Tube and Pipe Bender
Plasma Cutters
Plate Rolls
Press Brakes
Press Brake Tooling
Punching Equipment
Punch Tooling
Replacement Parts
Roll Forming
Safety Training
Shears
Slip Rolls
Software for Automation
Other Stuff
spacer
spacer
Staff
Knowledge Base
Events
spacer
spacer Tell us Why spacer
spacer
Tell us the reason you didn't buy from us today.
spacer
Guestbook
spacer Brown Nose Department spacer
spacer


Help your company prosper and share this information. Remember, if they don' prosper,
-you won't either.
spacer
spacer Vendor Info spacer
spacer
Ercolina CML USA
- More products from which to choose
spacer
spacer Notifications morespacer
spacer
NotificationsNotify me of updates to CE50 ANGLE ROLL
spacer
spacer Who's Viewing What spacer
spacer
Bots
us crawl 1
spacer
Shipping & ReturnsTerms of UseForumNewsletterPrivacy NoticeMfg and CatNewest Additions
Account and Transaction Pages Protected by:

Powered by osCommerce		   Serving Customers with Quality Metal Fabricating Equipment for over fifteen years
A.J. Machinery Co., Inc. - 20000  176th Street - Big Lake, Minnesota 55309
Phone: 1-763-262-8070 Fax: 1-763-262-8071

Copyright © 2003 - 2008 AJ Machinery Co., Inc.		   Valid HTML 4.01 Transitional
Valid CSS
small business web services
.
Parse Time: 2.133s   4170467 page views since Friday 03 January, 2003