Armor is not just
a coating, it is also a
process:
Extensive Surface
preparation to clean the
blade
An advanced coating
process which provides
superior adhesion and
performance
AlTiN Armor for
Productivity and Blade
Life
Lenox's Titanium
Nitride coating combine
Titanium ions and Nitrogen in
a vapor deposition
chamber. This creates a
black colored coating with
high adhesion to the tooth
edge substrate
and has low thermal
conductivity
characteristics which forces
the heat to the chips rather
than the blade.
High Quality,
Micro-Grained Carbide Tailored
to Cut a Wide Range to
Materials
The carbides are
optimized to provide a balance
between toughness and
hardness. They are
tailored to cut a wide range
of materials and are ideal for
coated blades.
High
Performance Backing Steel for
Longer Fatigue Life
Armor
Black CT blades use a
well-refined high chrome alloy
that enhances beam strength and
fatigue life.
Propriietary,
High Strength Carbide Weld
Process
Lenox
leads the industry in carbide
tooth weld strength and
technology. What good
is a high-tech carbide tipped
blade if the carbides are
lodged in the workpiece?
Specifications
Width x
Thickness
Teeth per
Inch/25mm
Inches
MM
0.9/1.1
1.4/1.6
1.8/2.0
2.5/3.4
1-1/4 x .042
34 x 1.07
1-1/2 x .050
41 x 1.27
2 x .063
54 x 1.60
2-5/8 x .063
67 x 1.60
3 x .063
80 x 1.60
Recommended
Speeds and Feeds*
Material Size and
TPI
Less Than 12"
/ 300mm @ 1.8/2.0 TPI
More Than 12"
/ 300mm @ 1.8/2.0 TPI
Material
Band
Speed
Feed
Rate
Band
Speed
Feed Rate
Carbon Steels
240F/73M
3.1I/78mm
240F/73M
1.7I/42mm
Alloy Steels
190F/58M
2.1I/53mm
190F/58M
1.1I/28mm
Bearing Steels
310F/94M
3.4I/86mm
310F/94M
1.8I/46mm
Stainless
Steels
230F/70M
2.6I/66mm
230F/70M
1.4I/35mm
F = Feet
Per Minute
M = Meters Per
Minutes
I = Inches
Per Minutes
mm = Millimeters
Per
Minutes
(*using
a flood sawing
fluid)
Questions and inquiries can be directed through our convienient Information Request Forms or by calling our Technology Center at 1-763-262-8070 or (Toll Free) at 1-800-827-3608